|
|
|
3778 0 1 0 |
|
Опции темы | Поиск в этой теме |
15.04.2012, 19:21 | 1 |
Модератор своих разделов
Регистрация: 03.07.2010 Последняя активность: 10.10.2022 08:53 Адрес: Copenhagen, Denmark
Сообщений: 1652
Сказал(а) спасибо: 0
Поблагодарили: 2983 раз(а) в 1024 сообщениях
|
Test/Review of Keeppower 18650 2800mAh (Black)
Keeppower 18650 2800mAh (Black)
Official specifications:
This battery is not the usual 4.2 volt charging, but needs 4.3 volt charging, i.e. a special charger must be used (Some hobby chargers can be adjusted for it). The capacity is slightly below 2800mAh, but very constant at different loads. The battery has a high voltage, but not higher than the best 4.2 volt batteries. Where it is better is runtime at high voltage. Test with 4.2 volt charging It is possible and perfectly safe to use this battery with 4.2 volt, but it will have less capacity. When only charging to 4.2 volt the battery looses about 200mAh in capacity. Conclusion That battery uses a good cell and does what is supposed to do, this makes it a very good battery. But the requirement for a special charger to get the full benefit of the battery, does reduce the usefulness of it. Using it with a 4.2 volt charger negates any benefit of the higher voltage and capacity. Notes and links Keeppower is a OEM manufacturer, i.e. many of the batteries they produce is sold with other names on them. The batteries was supplied by Keeppower for review. How is the test done and how to read the charts How is a protected LiIon battery constructed More about button top and flat top batteries
__________________
My website with reviews of charges, batteries and other stuff: http://www.lygte-info.dk/ |