[HKJ]

EnerPower+ 18650 3400mAh (Blue)



Official specifications:

• Nominal Voltage: 3.6V
• Capacity: 3400mAh
• Minimum Capacity: 3350mAh
• Standard charging current: 680mA for 5.5 hours to 4.2 V / 0.2 C
• Maximum charge current 0.5 C/1700mA
• Protection: 7A
• Deep discharge protection: at 3V
• Nickel base plate for added durability
• Diameter: 18.5 mm + / - 0.01
• Length: 68.8 mm + / - 0.01
• Weight: 48g

This is the latest cells from Panasonic with the highest capacity.
The cell used can be discharged down to 2.5 volt, in my test I only discharges to 2.8 volt, i.e. I do not measure the full capacity. But then, not all lights will be able to use the full capacity.











These batteries are good at both low and higher current.















Conclusion

This battery has higher capacity and better high current capacity than its predecessor (3100mAh/NCR18650A).
EnerPower has added a good protection to a good cell, making a very good battery.



Notes and links

The batteries was supplied by ENERDan for review.

How is the test done and how to read the charts
How is a protected LiIon battery constructed
More about button top and flat top batteries

[Li-Ion]

 Сообщение от HKJ :

Deep discharge protection: at 3V

 Сообщение от HKJ :

in my test I only discharges to 2.8 volt

How it could be?

[HKJ]

 Сообщение от Li-Ion :

How it could be?

Probably because EnerPower forgot to adjust the specification, due to the Panasonic cell, but they have, correctly, used a protection with a lower voltage.