|
|
![]() ![]() |
|
![]() ![]() ![]() ![]() |
|
Опции темы | Поиск в этой теме |
![]() ![]() |
![]() ![]() |
Модератор своих разделов
Регистрация: 03.07.2010 Последняя активность: 10.10.2022 08:53 Адрес: Copenhagen, Denmark
Сообщений: 1652
Сказал(а) спасибо: 0
Поблагодарили: 2983 раз(а) в 1024 сообщениях
|
![]()
Keeppower IMR18650 2250mA (Black)
![]() This battery is a high current battery without any protection! Official specifications:
![]() Because this battery is without a protection PCB, but with an added button top the size is only slightly longer than the official 65 mm long. ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() This battery does not have any current protection and the curve only shows voltage under load. Doing 5 tests (Each takes about 100 seconds when running up to 15 ampere) did use most of the capacity in the cell. This can be seen on the last part of the last test trace. ![]() Conclusion The battery uses a good cell, making it a fairly safe cell, but remember it is unprotected and must not be over discharged. For uses with high current this is a very good battery and it can deliver more capacity at a higher voltage than 3100 mAh cells at high current. Notes and links Keeppower is a OEM manufacturer, i.e. many of the batteries they produce is sold with other names on them. The batteries was supplied by Keeppower for review. How is the test done and how to read the charts How is a protected LiIon battery constructed More about button top and flat top batteries
__________________
My website with reviews of charges, batteries and other stuff: http://www.lygte-info.dk/ [Исправлено: HKJ, 23.07.2012 в 23:33] |
![]() |
![]() ![]() |