[run4jc]

Niwalker has shared another interesting new light with me - and asked that it be put through my 'real world' torture tests! Always only too happy to oblige, I jumped right into the tests. I believe that Selfbuilt will be doing comprehensive tests on this light, so I'll spare any extra commentary other than to mention that this is a large reflectored, XPE throw monster - using either 1 18650, 2 123s, or 2 18350s. For my tests I used (and left inside throughout the tests) 2 AW18350 cells.

Tests were as usual, with a couple of 'twists.' Submersed the light in water....

Прямая ссылка на видео YouTube

Then popped it in the freezer...


Froze it solid






Left it to thaw...in the mean time it spent more time in water - total of 24 hours between water and ice!!

Прямая ссылка на видео YouTube

Прямая ссылка на видео YouTube

Then off to the oven to bake at 225 for 2 hours...


Great heat sinking - took it out of the oven, quickly took the temp and it had already dropped 20 degrees...


And flipped it on....


Now a couple of 20 foot drops, then a few random tosses onto concrete...

Прямая ссылка на видео YouTube

Very minor marks on anno and the bezel ring






Looks worse in the photo than in 'real life'




We've seen lights boiled, run over by vehicles, seen them used as a hammer, seen them dropped from ridiculous distances, frozen, submersed forever, and some survive, some don't. I firmly believe that the 2 Niwalkers I have tested so far will go the distance and survive just about anything a user could submit them to in the way of 'real world abuse.'

Thank you Niwalker, for entrusting me with testing your lights, and for making solid products! I look forward to Selfbuilt's tests of this great new light.

[dmn42]

Did you bake it with battery?

[run4jc]

 Сообщение от dmn42 :

Did you bake it with battery?

No - I removed the battery