|
|
|
3991 0 0 0 |
|
Опции темы | Поиск в этой теме |
23.11.2010, 10:47 | 1 |
Новичок
Регистрация: 28.06.2010 Последняя активность: 18.05.2011 08:15 Адрес: TW
Сообщений: 22
Сказал(а) спасибо: 0
Поблагодарили: 0 раз(а) в 0 сообщениях
|
My Olight T25 regular version (with beamshots and runtimes)
My Olight T25 was purchased from batteryjunction, Some important specifications (copied from batteryjunction): *Uses 2 X AA batteries - primary or NiMh/NiCd rechargeable. (1-4V input) *Ultra Efficient, State of the art CREE 7090 XR-E Q5 WC LED 190 lumens on high! *Deeper and fully textured orange peel metal reflector ensures a smooth beam and excellent throw. *MIL-SPEC Type III black hard anodized finish. *152.8mmx25mmm *Output/Runtime: 190lm/1.5 hrs, 90lm/5 hrs, 45lm/12 hrs, 15lm/33 hrs, 6lm/80 hrs, Strobe: 190lm/2hrs, SOS: High/3 hrs, Low 40hrs Output levels operation: Twisting head for 5 levels brightness selection, and click the reversed tail button for on/off, strobe and SOS. T25 is bigger than the Fenix L2D Q5, it uses deeper textured reflector instead of the “hybrid” reflector that T20 used. Lux readings at 1meter Level 1: 267 lux Level 2: 560 lux Level 3: 1182 lux Level 4: 2580 lux Level 5: 5880 lux The total output is a little higher than L2D Q5, and thanks for this new designed OP reflector, it generates a smooth beam and bright hot spot. Here are beamshots 5m shots, left to right: L2DQ5, T25Q5, TK10Q5 10m shots, left to right: L2DQ5, T25Q5, TK10Q5 Runtimes: After playing T25 for couple days, briefly, I like T25 very much, bright (with good throw), nice looking, good quality, and the easy UI for multiple output selection, although I still prefer the UI in my fenix L2D. |