 |
|
| ||||||||
|
|
|
 4150
 0
 1
 0
|
|
|
Опции темы | Поиск в этой теме |
20.12.2011, 22:16
|
1
|
|
Модератор своих разделов
Регистрация: 03.07.2010 Последняя активность: 10.10.2022 08:53 Адрес: Copenhagen, Denmark
Сообщений: 1652
Сказал(а) спасибо: 0
Поблагодарили: 2983 раз(а) в 1024 сообщениях
|
Test/Review of Spark 18650 2600 mAh (Black)
Spark 18650 2600 mAh (Black)
 Official specifications:
  Inside the envelope the cells was only wrapped in a piece of paper.       This battery has a high voltage at low loads.       Conclusion This battery uses a Sanyo cell, this is a good quality cell and as can be see on the curves the two cells does track very nicely. There will be no problem with series applications of this cell. The high voltage can be an advantage in smaller (i.e. 3-4 watt) lights where the battery replaces two CR123 cells. The PCB current limit is placed about 30% above the cell specification, this is a good value. All in all a very good battery. Notes and links How is the test done and how to read the charts How is a protected LiIon battery constructed More about button top and flat top batteries
__________________
My website with reviews of charges, batteries and other stuff: http://www.lygte-info.dk/ |
|
|
|
|
|
|
